• 2 crank hospital bed,manual crank hospital bed,manual hospital bed,medical bed with rails,2 crank manual hospital bed
  • 2 crank hospital bed,manual crank hospital bed,manual hospital bed,medical bed with rails,2 crank manual hospital bed

BAM203 Medical Manual 2 Crank Hospital Bed with L-shaped rails

Product Specialty:
Manual Hospital Beds are medical beds that use hand cranks to raise the entire bed level, as well as the head and foot sections of the bed. This results in optimal comfort for the patient. Manual hospital beds are just as versatile as full and semi-electric beds, but lack the risk of motor failure and maintenance.

  • Product Description
  • Technical Parameters
  • Video
Medical Manual 2 Crank Hospital Bed with L-shaped rails Description:

2 Crank Hospital Beds As an economical and efficient solution, these manual crank Hospital Beds can optionally be operated by using a hand crank to head and foot angles. Manual Hospital Bed provides a slow back rise with no resistance to gentle rocking. The function of back lifting and bending leg is the necessary function of bed for rehabilitation nursing of bedridden patients. 2 Crank Manual Hospital Bed also benefits from no risk of motor failure and maintenance. The operation device is simple, reliable, convenient and labor-saving, the main structural components are all made of high-quality steel, the overall weight is light, so that the nursing bed becomes the right-hand man of patients and nursing staff. Medical Bed with Rails has two fold guardrail options.

Medical Manual 2 Crank Hospital Bed with L-shaped rails Features:

◊1. The bed frame adopts low carbon steel ERW rectangular tube, which is treated by electrophoresis and powder spraying. The bed plate is made of 10-section cold-rolled steel plate, which is wide and can protect the safety of patients.
2. Stamping one-time forming platform, ensure smooth surface without welding marks, bearing 250KG.
3. ABS head and foot board, removable, with safety lock, avoid falling off. CPR board can be used in emergency.
4. Two functions can be operated by crank. The ABS folding crank retracts to the end of the bed when not in use. It protects caregivers from any possible protruding injury.
5. 4 φ125mm silent wheels with brakes, easy to move.
6. Double swing two function bed function: backrest adjustment, knee adjustment.
7. Extreme protection device, warning when tilting to maximum position
♢8. L-type foldable guardrail, Install firmly, don’t shake, easy to install, easy to clean, clamp. Also can choose right Angle folding guardrail.
9. Four corners with infusion stand jacks and drainage hooks. Infusion stand is optional.
10. The four corners of the bed are fitted with anti-collision wheels, which are made of plastic and protrude out of the bed.
11. Wooden side bumpers are set on both sides, which can effectively prevent the hospital bed from colliding directly with elevator, door frame and other planar obstacles during operation and use, ensuring a smooth transition.

2 crank hospital bed,manual crank hospital bed,manual hospital bed,medical bed with rails,2 crank manual hospital bed
Related equipment:
Hospital Bed Air Mattress
Beside Cabinet
Over Bed Table
Attendant Chair

Specification
Model BAM203
Measure
Length: 2130mm
Width: 980mm
Height 500mm
Technical Features
Backrest max upward angle 0-70°
Footrest max upward angle: 0-40°
Loading Capacity
Loading Capacity 250kg
Power supply 220VAC or 110VAC   Frequency: 50-60HZ
Power Plug:EU type standard if other type, confirm each order
Optional Matress
IV POLE
The Weighing Function
Extension bedplate
Over Bed table
beside locker

Video

Products List

Recent Products