You are here: Home » Products » OB & GYN » Infant Incubator » HB-YP2008 Hospital Newborn Baby Care Infant Radiant Warmer Incubator
  • Newborn Baby Incubator, Radiant Warmer, Baby Care Infant Warmer, Transport Infant Incubator, Portable Radiant Warmer

HB-YP2008 Hospital Newborn Baby Care Infant Radiant Warmer Incubator

Incubators and radiant warmers are used to maintain the body temperature of newborn infants. This is best done so that the energy expended for metabolic heat production is minimized. The heat output of these devices is usually regulated by servocontrol to keep the skin temperature constant at a site on the abdomen where a thermistor probe is attached.

  • Product Description
  • Technical Parameters
  • Video

HB-YP2008 Infant Radiant Warmer Incubator Features:
Two control modes: Air mode and baby mode controlled by micro-computer;
The information can be recorded and checked by the separate LCD display screen;
Humidity and oxygen concentration display and servo control;
>37℃ temperature set function;
The air circle with outlet in both front and back;
Brushless DC motor with low noise;
Double wall hood, operating doors on three sides;
X-ray cassette under the bassinet;
Integrated water reservoir in the shape of drawer which can be autoclaved; Inclination of bassinet is adjustable;
The height of whole unit can be adjusted;
Failure alarm indication;
RS-232 connector.
Standard Configuration:
Main body(including baby compartment, base, controller, I.V.pole and tray), the senor box, skin temperature sensor and vertical height adjustment stand (VHA stand).
Optional Configuration:
Optional: Weighing system, Monitor shelf and Disposable skin temperature sensor
Power supply: AC220V-230V/50Hz or AC110-120V/50-60Hz , 1300VA
Specification:
Mode of control: Air mode and baby mode controlled by micro-computer
Air temperature control range: 25℃ -37℃ (override mode 37-39℃ )
Baby temperature control range: 34-37℃ (override mode 37-38℃ )
Accuracy of skin temperature sensor: ±0.2℃
The temperature difference between incubator temperature and average incubator temperature(under steady temperature condition)≤0.5℃
Temperature uniformity≤0.8℃ (mattress is on the horizontal position)
≤1.0℃ (mattress is on the tilt position)
Inclination of the bassinet: ±12° (stepless adjustable)
Noise inside hood: 45dB(A)
Failure alarm: over-temperature alarm, temperature deviation alarm, sensor alarm, motor fan failed alarm, power failure alarm, water tank position alarm, system alarm and so on
Humidity display range: 0%RH-99%RH
Humidity control range: 0%RH-90%RH
Accuracy of humidity display : ±5%RH
Accuracy of humidity control: ±5%RH
Indication range of oxygen concentration: 0%-99%
Control range of oxygen concentration: 20%-60%
Indication accuracy of oxygen concentration:±2% (oxygen concentration setting value is 25% and below); ±3% (Oxygen concentration setting value is 25% and above)
Control accuracy of oxygen concentration: ±4%
Range of weigh: 0-8000g (weight system)
Resolution for weight indication: 1g (weight system)
Accuracy of weigh indication: ±1% (weight system)
Environmental Temperature:
Operating range: 20℃-30℃ (Set temperature should be higher 3℃ than the environment temperature)
Ambient air movement rate: 0.3m/s
Product Packaging:
Package: each unit is packed as one carton
Size (Main body):1110mm x 707mm x 883mm
(Cabinet): 1029mm x 697mm x 826mm
Gross Weight (Main body): 70Kg
(Cabinet): 80Kg

Products List

Recent Products