GA-2003D Autopsy Table Morgue Corpse Table Description:

1. The overall material is made of stainless steel SUS high-quality steel plate, which is acid-resistant, alkali-resistant and corrosion-resistant, and is suitable for long-term anatomical autopsy operations.

2. The inner arc connection of the table is not easy to scale, which is convenient for cleaning and disinfection. It is equipped with a whole sieve partition, which can be disassembled for flushing and disinfection.

3. A hair separator is installed in the pool to prevent foreign matter such as hair from entering the drain pipe and causing blockage. It is also equipped with a grinder, which is equipped with an induction motor inside to cut off the flow, acid-resistant and alkali-resistant, crushing human tissue during the dissection process and discharging it through the drain.

4. The faucet can be connected to a water heater, and the temperature of the water outlet can be adjusted by the hot and cold regulator.

5. It is equipped with a high-pressure spray flushing water gun, and the water pressure can be adjusted according to needs for different cleaning operations.

6. There is a negative pressure exhaust system inside, which uses the under-table exhaust method to exhaust downward, which can quickly remove harmful gases generated during the dissection process.

7. The side of the table is equipped with leakage protection and waterproof sockets.

8. Fixed style height 850mm, optional base lift, lift range 100mm up and down.

9. Optional tabletop waste bucket, can collect waste generated during dissection in time to prevent pollution.

10. Optional stainless steel corpse pillow to keep the corpse in the correct position.

Video