Zhangjiagang City, Jiangsu Province, China.
+86-512-58810663
The orthopedic Traction Frame is mainly designed for diagnosis, correction, prevention, and treatment for the patient with disorders of the bones, joints, muscles, ligaments, tendons, nerves and skin. The fraction frame is suitable for a variety of beds, is installed in four I.V,Pole-holders.
The Stainless steel orthopedic traction bed is a new therapy equipment on orthopaedics. surgery and traumatic treatment. The folding bed surface and the accessories perform expanding traction to different parts of the vertebra and the extremities without moving the human body. It’s widely used because of it’s easy and convenient operation.
1. four parts of the bed plate using high quality cold rolled steel plate, electrostatic spraying.
2. The head and tail plates are made of ABS material and equipped with locking device, which can be quickly disassembled and used as cardiopulmonary resuscitation plates for emergency use to meet the needs of clinical first aid.
3. Three crank, used to adjust the back, left and right sides of the knee lift.
4. Equipped with stainless steel double-arm traction rack, can be used for cervical traction or double-arm traction or other parts of traction.
5. Orthopedic traction racks can be removed and located under each side of the head and foot of the bed.
6. 6-aluminum alloy side railings to prevent the patient from falling.
7. 125mm diameter noiseless casters with independent brakes.
8. It is an ideal equipment for orthopedic treatment for traction, treatment and rehabilitation of orthopedic patients.
Specification | |
Model | BAM303G |
Measure | |
Length: | 2130mm |
Width: | 990mm |
Bed Base Height Range | |
Height | 490mm |
Technical Features | |
Backrest max upward angle | 0-75° |
Knee section(left) up: | 0-40° |
Knee section(right) up: | 0-40° |
Loading Capacity | 250kg |
Optional | Matress |
Weighing system | |
Extended bed frame | |
IV Pole | |
X-ray bed board | |
Oxygen cylinder holder |